Locate and manage all your devices in one place.

Coban - GPS306

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.


  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • mainteanance remind alert
  • Low battery alarm
  • External Power off alarm
  • GPS blind Spot alert
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number

ConfiguraciĆ³n GPS306

Country Operator APN User Password

To set HUOfHT you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
  2. Set the time zone UTC-0
    ZwLL qrxVscxZTx C
  3. Set up our operator APN
    q1RacRe3p dSvK3PC
  4. Set the username and password of APN operator
    bLIu4CcK 7oSSMoeK 1AVxEk3Q
  5. Establish the server where we will connect
    2fJJT8jvkOlci 6tUcYHkxFT7dm KODH
  6. Switch to GPRS mode to begin transmission UDP

To check settings xKlU4JyYcrN

To enable the status of the fuel sensor or improve the transmission of the status of the digital sensors 0R2VH0QeQ17jt1 F0

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.