Locate and manage all your devices in one place.

Concox - TR02

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

GPS Car Tracking Device with Built-in Antenna TR02


Concox TR02 is its first GPS vehicle tracker only with simple locating & tracking system. Its simplicity enables it appeal to the majority of the target market. And it is cheap and cost-effective so that many of us can afford to buy one.

1.  Group Management
     You can manage the vehicle by setting up difference groups.
2.  Geo-fence Notification
     Setting up a zone to monitor the vehicle when it enters or exits this zone.
3.  Multiple Account Support
     Allow you to set up an account for company users to manage many vehicles. 
Weight 53g
Dimensions 86.7 ( L) X 44.0 (W) X 13.7 (H) mm
Working voltage/current 9-36VDC / 25mA
Operation temperature -25℃ - 60℃
Operation humidity 5% - 95% RH
LED indicator Three LED indicators: GPS-blue; GSM-green; Power-red
GSM frequency 850/ 900/ 1800/ 1900 MHz
GPRS Class12, TCP/ IP build in GSM Module
GPS MT3326
Frequency L1,1575.42MHz C/A code
GPS antenna Built-in high gain ceramic patch antenna
GPS Channels 20
Tracking sensitivity -159dBm
Acquisition sensitivity -144dBm
Locating time cost Hot start: <2 sec(open sky)
Warm start: <15 sec
Cold start: <38 sec(open sky)
Certifications CE, ROHS

Feature List

  • GPS + GSM + GPRS wireless network
  • Built-in high sensitive GPS chipset
  • Built-in GSM & GPS antenna
  • Real-time tracking
  • Start working automatically after electrifying
  • Built-in monitor circuits to avoid breakdown
  • Built-in ON / OFF power, wide voltage input range
  • Built-in acceleration sensor for saving power intelligently and Resisting static drifting
  • Installing method: covert / open
  • Three LED indicators: GPS - Blue; GSM - Green; Power - Red
  • Check location via platform service



Configuración TR02

Country Operator APN User Password

To set te1Crh you need to configure as follows. With the following commands through several text messages:

  1. Reset factory settings
  2. Set the time zone UTC-0
  3. Set up our operator APN
  4. Establish the server where we will connect
  5. Define that transmits every 60 seconds
  6. Enable GPRS

To check parameter settings WjcVpGPH

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.