Locate and manage all your devices in one place.

Condor - TG-512

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website
• It has external power in a voltage range of 8-32 VDC
• Also works with rechargeable Li-Ion batteries
• Activates visible panic alerts in the software through the internet
• It has memory capacity of at least 2,500 positions and retransmit them when the transmission signal is recovered
• Can transmit with / without motor ignition signal
• This type of tracking device can be used on vehicles, people and / or animals.

Configuración TG-512

Country Operator APN User Password

To set the device on 3KLXf3 are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.

With the following commands through several text messages: In the example it is assumed that the device password is 0000 which is the initial of the device and data APN from your operator.

The most common commands for these enabled devices are placed (You should consult your manual).

Type the IMEI number
  1. Set the APN of your operator, the values Replace your operator
  2. Set 5-digit identifier to be used with 3KLXf3 normally the last 5 digits of IMEI, replace XXXX by the identifier.
    GeS0kZvShDLv47wWgy1U0 7 gwwbyM5tPvJvwkZh2wtv0oU9xvlCxH1XZJ8
  3. Set the Timezone in UTC-0
  4. Establish the server where we will connect.
  5. How often we want to establish the position is sent every 1 minute
  6. Enable the GPRS connection

To check the settings Reg8e2pg1vgjCh

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.