Locate and manage all your devices in one place.

Gelix - Gelix G Lite

From $0.99 USD*
Pay as you go. No contract
Gelix G Lite
Visit the manufacturer website

"FELIX G-LITE" Receptionist Telematics is equipped with communication module navigation GLONASS / GPS GSM / GPRS and data interfaces. * The navigation receiver GLONASS / GPS allows the capture location after the power (cold start) for 29 seconds.

Navigation GLONASS / GPS receiver uses 12 channel mode GPS-signal mode, 12 channels and 24 channels GLONASS mode GLONASS / GPS combined reception. Note that the use of GLONASS / GPS module has been tested and approved for several major domestic manufacturers of equipment GLONASS / GPS use.

The device can connect relays for controlling an electronic lock. The device is built to work with fuel level sensors and sensor OmniComm production vehicle CAN bus adapters and Russian and foreign production.

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.