Locate and manage all your devices in one place.

Generic - GT -110E

From $0.99 USD*
Pay as you go. No contract
GT -110E
Visit the manufacturer website
GSM frequencies: 900MHz/1800MHz, or 850/900/1800/1900mHz 
Working voltage: +12~20 VDC, or 24VDC 
Power Consumption: Idle current <=60mA, Working current <= 250mA 
Maximum sending power: 1W 
Working temperature: -30~70degrees 
Humidity: 0 ~ 95% 
The time from alarm's triggering to receiving: <=10 seconds 
Dimension of main unit: 7.5 * 5.4 * 2.5cm 
Net weight: 0.1kg 
Gross weight: 0.5kg 
color: black / white 

www abt-auto com, market@abt-auto com 

car alarm & tracking system 
Anti-theft: automatically send SMS to your phone in case of theft 
Voice monitoring: monitor the voice around the car via telephone 
Cut off the car power/fuel supply by SMS, to stop the car 
Lock/unlock the car door by first phone owner 
Inquire the car's location, speed & direction via SMS 
Two kinds of location information, user could locate the precise location by GPS. At those place where there is no GPS signal, user could also locate the car by CPS system(located by GSM network) 
Track the car by SMS or by software(The software is optional) 
Anti-tamper design with backup battery, stable and reliable 
Flexible design, the system could work without the third party. User can also set up a management center to supervise & control many vehicles at the same time (optional) 
If the car exceeds the limited maximum speed(overspeed alarm, or the car oversteps the certain territory(=Geo-fencing), the system will send SMS to warn the user. (Optional function of the management software) 
1) SOS alarm (optional)
2) Shake sensor (optional)
3) Over speed alarm
4) When the vehicle in the arm status, it will alarm when it move over 100m
5) It can remind you when the alarm of the power-off and low power of the built-in battery (low power alarm) 
Automatically send the position by the software 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.