Locate and manage all your devices in one place.

Generic - GT -110M

From $0.99 USD*
Pay as you go. No contract
GT -110M
Visit the manufacturer website


  1. We have our own server platform & client software, all of which are developed by ourselves, and it's free for customers to enjoy the service;
  2. very easy to install;
  3. very small to hide;
  4. waterproof with thermoplastic hose;
  5. can cut off power/fuel supply of motorcycle/bike remotely if necessary;
  6. Reply with a Google link SMS;
  7. SOS emergence help can make the owner safe;
  8. Built-in motion sensor for power saving;
  9. movement alarm;
  10. power-cut alarm & low power alarm;
  11. GPS blind area alarm(in/out);
  12. with client software, it can be tracked at any time.


  • Owner can control the device by mobile phone
  • Reply with a Google link SMS, i.g.,,+114.210323&ie=UTF8&z=16&iwloc=addr&om=1
  • Easy to hide, easy to install
  • Built-in battery: last for over 24hours
  • Engine alarm: At arm status, if someone starts the engine, the owner will receive an alarm SMS from the device and stop the motorbike automatically
  • Internal shake sensor: At arm status, if somebody shakes the motorbike, the device will send an alarm SMS to the owner
  • In arm/disarm status, press the SOS button for 3 seconds, the device will alarm
  • Power off alarm: When device power off, it will send the SMS to owner
  • Stop the motorbike: the owner can send the command to the device; the device will stop the motorbike intelligent (According to the speed)
  • If the device alarm at arm status, all the alarm should cancel with the disarm command
  • Real-time monitor function, uploading data about motorbike state and position in preset time interval and preset times 


  • Dimension: 70 * 45 * 16mm
  • Gross Weight: 150g (with built-in battery 1000mAH)
  • Exterior Power Supply: DC 9V ~ 36V
  • Inner lithium battery: as backup battery, works for 24hours
  • Power Consumption: Active mode(avg.), 12mA; Idle mode, 3mA; Sleep working mode, 0.01mA; Offline warning mode, 0.01mA (if exterior voltage is 12V)
  • Operating Temperature Range: -20 ~ +65 °C
  • Air pressure: 860Kpa ~ 1060Kpa
  • Humidity: 5% ~ 95% non-condensing
  • Position accuracy: <=15 meters
  • GSM chip: SimCom, support GSM 850/ 900/1800 /1900MHZ
  • GPS chip: Sirf-Star III (super-sensitivity and high accuracy ) 

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.