Menu
Locate and manage all your devices in one place.

NVS - CH-5704

 
From $0.99 USD*
       
Pay as you go. No contract
CH-5704
Visit the manufacturer website

A set of the automobile terminal manufactured by ZAO KB NAVIS, operating on the signals of the GLONASS / GPS / GALILEO / SBAS SNS with data transmission via the GSM channel.

The set of the automobile terminal is intended for use as a vehicle monitoring and protection system. The terminal is developed on the basis of navigation receiver NV08C manufactured by ZAO KB NAVIS.

The terminal has an open protocol of information exchange and can be integrated into any of the existing navigation and information systems.

Configuración CH-5704

Country Operator APN User Password

To set hRga4i you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device

  1. Factory reset
    7gkRWJ7Myta
  2. Set the time zone UTC-0
    zCW6 qZu4GgBp2l W
  3. Set up our operator APN
    8UIovuYMv e7f082E
  4. Set the username and password of APN operator
    0nNafu2o RiT3KfnZ LoVdG0jd
  5. Establish the server where we will connect
    ZnDDGONcq1SFB 1sMw5TERWRHWq eTWK
  6. Switch to GPRS mode to begin transmission UDP
    9DtlcX671yYwod
    or
    I93kXLw7Wl

To check settings 0lbt436ObBl


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.