The GL500 is a powerful GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL500 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL500 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL500 into existing tracking systems based on this full featured protocol.
Low power consumption, long standby time for more than 1000 days
Powered by two user replaceable lithium batteries (CR123A)
Internal u-blox chipset
Quad band GSM/GPRS 850/900/1800/1900 MHz
Embedded @Track protocol
Internal 3-axis accelerometer for motion detection
To set lJeQ4P you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.
Begin with the configuration BE1wEL6fxDjKMV91fTjMFxlXmYT
Set the time zone UTC-0 j4z4B48xWcOaCWrmUYZy37gMfrSzSGh9s
Set up our operator APN 5h1zPAaxtGdz5lODCUZ2yh9PqJWBW8k2NM7cbDHiXNH7zDv9cO
Establish the server where we will connect LmdlmOxvrcwNfbnUTDDBxtqxQfGrzDLJhnSTt3p8CoRmKORpNlsQbi6c5qVGIF5nRnp2JUlZ
Define how often will transmit position 60 seconds. YF8JbEmCObeOV4r9qzYDii07soVgiZg3AS2WjxB0DT2qlrRW6qLT
Activate notification by SOS button input 2 UlQTeYilIFoYauflmsnvm9N0ekaBZnXWiIo8l3r