The GL505 is a powerful waterproof GPS tracker designed for fixed asset tracking applications. It is powered by two user replaceable CR123A lithium batteries. Configuration allows it to wake up on a preset schedule to check if it needs to shift from dormant to active status and/or send update of its current location, then returning to a dormant state. Optimally configured, it will operate autonomously for 1000 days. Its built-in 3-axis accelerometer allows the GL505 to detect asset movement and transmit an alert message. The integrated @Track interface protocol allows the GL505 to communicate with a customer mobile phone or a backend server via GPRS/SMS and transfer reports of GPS position, etc. System integrators can easily incorporate the GL505 into existing tracking systems based on this full featured protocol.
Waterproof, IPX7 compliant
Low power consumption, long standby time for more than 1000 days
Powered by two user replaceable lithium batteries (CR123A)
Internal u-blox chipset
Quad band GSM/GPRS 850/900/1800/1900 MHz
Embedded @Track protocol
Internal 3-axis accelerometer for motion detection
To set Gu40jj you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is $ model $ which is the initial data from the device and the APN are those of APN_OPERATOR.
Begin with the configuration DNjd23gKbkUMk9XFUPN7MKVhKvd
Set the time zone UTC-0 lAHvowVWcxYIRjr1enzLhQc79LplbmNy1
Set up our operator APN KjKzx9bTNIfV0tJSIpsPy19lGVWDp1D4FE5kqdHZtAy2AYDYQd
Establish the server where we will connect Phht3k7yOJA62fTqKnS6JJLc7wl9DSbi9gNPF37OdOX0XrYgJuI982FFWFwH98u6sc7WRDkR
Define how often will transmit position 60 seconds. qDd5vVEQXFzTJbkHaH2AH0PedbH5uCOFJ1T4YKTBAft4IawQ106J
Activate notification by SOS button input 2 IMHrVTkjscnXoVFlQwyjloiSfxDHlsR7wMt1wYs