Locate and manage all your devices in one place.

Teltonika - FM 4200

From $0.99 USD*
Pay as you go. No contract
FM 4200
Visit the manufacturer website

FM4200 is a terminal with GPS and GSM connectivity, which is able to determine the object’s coordinates and transfer them via the GSM network. This device is perfectly suitable for applications where location acquirement of remote objects is needed. It is important to mention that FM4200 has additional inputs and outputs, which let you control and monitor other devices on remote objects. 1-Wire® interface (for Dallas digital thermometer or IButton reader) and CAN interface integrated (for trucks FMS interface data acquisition). It also has a RS232 port for NMEA output and configuration (also it could be used for peripheral devices communication with special firmware).

Basic characteristics
GSM / GPRS features:
• Teltonika TM1 dual band module (900, 1800 MHz)
• GPRS class 10
• SMS (text, data)
• Voice calling
GPS features:
• uBlox NEO-5M 50 channel receiver
• -160 dBm sensitivity
Hardware features:
• ARM7 TDMI processor
• 1 MB internal Flash memory
• Built-in CAN-BUS support (J1939 / FMS protocol) 7
• Built-in 3 axis accelerometer
• Internal backup battery
Interface features:
• Power supply: 10 – 30V
• RS232 port
• Audio port
• 4 digital inputs
• 4 analog inputs
• 4 open collector outputs
• Fuel counter inputs
• 1Wire® temperature sensor
• 1Wire® iButton
• External battery input
• 2 status LEDs
Special features:
• Any element event triggers (external sensor, input, speed, temperature, etc.)
• Smart profile switching (GSM operator or any element dependant)
• Highly configurable data acquisition and sending
• Multiple geofence areas
• Sleep mode
• Deep sleep mode
• Real-time process monitoring
• Authorized number list for remote access
• Firmware update via GPRS or RS232 port
• Configuration update via GPRS, SMS or RS232 port
• TCP/IP or UDP/IP protocol support
• 7500 record storing

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Use Plaspy with a tracker

  • Set the Operator APN
    Country Operator APN User Password
  • Check your tracker clock setup is set UTC-0 o GMT. (The most trackers come from the factory on UTC.)
  • For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
  • Set Up the Plaspy's IP and port on your tracker: (Plaspy detects tracker's protocol.)
    Server IP Port 8888
  • Add a Plaspy Account on devices with the IMEI or unique ID.