Locate and manage all your devices in one place.

Xexun - TK-102-2

From $0.99 USD*
Pay as you go. No contract
Visit the manufacturer website

Based on old version TK102-2,add SD card slot,more bigger battery ,ARM7 processor

It is the new version of TK102, we called it TK102-New or TK102-2. There is a SD card slot in TK102-2. The GPRS data can be saved in SD.

Support non-server based location
SD card memory to record GPS standpoints
Authorize/delete 5 preset phone numbers
Real-time Polling
Auto-Track by SMS
Voice surveillance
Mode switch between "track" and "monitor"
Geo-fence alert
Movement alert
Overspeed alert
IMEI checking
SOS button
Low battery alert
Hidden number tracking
SMS center
Motion sensor
Mobile tracking
Tlimit function

ConfiguraciĆ³n TK-102-2

Country Operator APN User Password

To set a Xexun device on kQfwDJ, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
  2. Set up our operator APN
    ZUullF7Nl 5FadVSY
  3. Set the username and password of our APN.
    ekxV149wgfGrJ LQYAH3hz
    7yz3LFxaXidPkw8 MEwQHmhU
  4. Establish the server where we will connect
    HubMBwYiyo8BK kF4U5X2jUYjRC 91Ds
  5. Set the device to send data
  6. How often we want to establish the position is sent every 60 seconds

This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.