Menu
Locate and manage all your devices in one place.

Xexun - XT008

 
From $0.99 USD*
       
Pay as you go. No contract
XT008
Visit the manufacturer website

Function of gps traker:

 Rreal time tracking.
 interval tracking
 real street address replying
 track when no GPS signal.
 GPS+LBS tracking
 tracks playback.
 geofence alert
 movement alert
 overspeed alert
 Low power alert
 FOTA(firmware by the air)
 Listen in two-way communication
 vibration alert
 SOS alert
 Alert when cutting off the GPS antenna
 Alert then cutting off the external power
 Alert when switching on the ignition illegally
 Dual SIM,shift to the workable GSM operator automatially when the other GSM operator is not working or an roaming area
SD card (optional)
RFID (optional)
Remote the engine. (optional)
 Fuel monitoring,temperature monitoring( optional)                                                                                                   
camera (optional).   

 

SpecificationS of gps tracker

1-Oil Tester-for option.To test the oil level of oil tank of vehicles. 
2-Report the battery strength 
3-Temperature sensor

Configuración XT008

Country Operator APN User Password

To set a Xexun device on KjlMWI, you must configure it as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial data from the device.

  1. Begin with the configuration
    KnzT9hw9mEU
  2. Set up our operator APN
    FgxL7tKXl 7Ou6njp
  3. Set the username and password of our APN.
    vyV3IWqZSp24j c3purH8z
    UpYXAHDeCKEBFeV z5ZFg6kt
  4. Establish the server where we will connect
    Njc5vM9JDPP1Q q2vmA9Ki2qTiF wreK
  5. Set the device to send data
    yl4pRisKngCqro
  6. How often we want to establish the position is sent every 60 seconds
    N5IVuvWNkvWCtUz


This information only is for informational purposes only, Plaspy does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.