The TopShine VT1000 is a powerful GPS tracker that offers advanced features and high-cost effectiveness. It is equipped with an ARM9 high-speed microprocessor and supports a wide range of functionalities for fleet management and vehicle security purposes. With its bidirectional communication capabilities, the VT1000 allows for real-time tracking via SMS/GPRS (TCP/UDP) or through the web-platform. It also supports OTA (updating online) for firmware upgrades, ensuring that you always have the latest features and improvements.
One of the standout features of the VT1000 is its support for a camera, which allows for location and driving information to be logged on pictures. This can be incredibly useful for capturing evidence or monitoring driver behavior. Additionally, the tracker supports a maximum 64GB SD card for storing data and pictures, providing ample storage capacity. The VT1000 also features 4 A/D connectors for multi-fuel sensor monitoring, allowing you to keep track of fuel levels and consumption.
With its extensive range of features, the TopShine VT1000 is suitable for various applications, including vehicle real-time tracking, car security/anti-hijack, and fleet management. Whether you need to monitor your personal vehicle or manage a large fleet of vehicles, the VT1000 offers the reliability and functionality you need.
Key Features:
- Tracking by SMS/GPRS (TCP/UDP)
- Real-time tracking via the web-platform
- Support for camera (location & driving information log on picture)
- Built-in backup 950 mAh battery
- Remote engine cut off to stop the car in a safe condition
- Support for OTA (updating online) for firmware upgrades
- Harsh braking and acceleration alarm
- Support for RFID kit for automatic anti-theft and driver identification
- Support for fuel sensor monitoring
- Geo-fence alert
Set Up VT1000
To set the tracker send the following commands by SMS messages, the sample setup the device password is gZHnjP, this password is the default
-
Reset to factory settings
WgZHnjP,990,099### -
Set the device Id, user the 14 firsts numbers from IMEI, Plaspy uses like id the 15 IMEI digits
WgZHnjP,010,{{('XXXXXXXXXXXXXX' + imei.substring(0,14)).slice(-14)}} -
Set the operator APN
WgZHnjP,011,{{apn}},{{apnu}},{{apnp}} -
Set the GPRS server
WgZHnjP,012,54.85.159.138,8888
-
Switch to GPRS mode
WgZHnjP,013,2 -
Set the update interval
WgZHnjP,014,6
To get device IMEI WgZHnjP,601
